Professional Studio Broadcasting Recording Condenser Microphone Kit

.sku-text{font-size:13px;width:898px;margin:5px 0;font-family:'Verdana';}Professional Studio Broadcasting Recording Condenser Microphone & NW-35 Adjustable Recording Microphone Suspension Scissor Arm Stand with Shock Mount and Mounting Clamp KitSpecification:Microphone---Polar Pattern: Uni-directionalFrequency Response: 20Hz~20kHzSensitivity: 45dB±1dBOutput Impedance: 1500Ω±30%(at 1kHz)Load Impedance: ≥1000 ΩEquivalent Noise Level: 16dBAElectrical Current: 3mAMicrophone Output Interface: 3.5mm (0.14 Inch)Usage Voltage: 48V phantom power supplyWire: 3.5 inserted audio interface, 3 meters longMicrophone Body Weight: 0.51lbSize: Approx. 16 x 5 x 5cm (6.3 x 1.97 x 1.97inch)Microphone Material: Steel net + Zinc alloy hand holding partPop Filter---External Diameter: 155mm(6.10inch)Function: Reduce P-pops in recordingDouble-layer Net Diameter: 130mm(5.12inch)Tube Length: 375mm(14.76inch)Tube Diameter: 8mm(0.31inch)Mounting Clamp: Up to 35mm(1.38inch)(Clamp adjustable)Flexible Holder: 360 degree swivel mountStand---Material: SteelArm Stand Weight: 850g(1.87lb)Each Arm: 36cm(14.1inch)Arm Stand Support: Up to 2kg(4.41lb)Double-braced Arms: Add strengthFeatures: Stable, tough, and affordableSteel Construction: 9x9mm(0.35x0.35inch) cross-sectionMount Base: Installed onto the desk up to 55mm(2.17inch) thicknessMount on: announcers' desk with the metal mounting baseXLR Male to Female Microphone Cable: Pre-installed hidden inside the boom arm tubing1. Mount onto the stand2. Screw to adjust the angleWarm prompt:Generally, the default pull positioning button is setting in screw hole with primary requirement. If you need to enhance the bearing burden of suspension arm stand, you can lock the pull positioning button to different screw hole so that you can enhance the stretch strength of the outer spring, then you get the effect.The illusration shows:1. The base standard part installation;2. Suspension arm link with the base standard part;3. Locating the arm direction, tighten the nut;4. One end of spring link with pull positioning button;5. Shock mount link with the arm;6. Locating the stand to where you need;7. Put the microphone into clamp ring of shock mountGeneralBrandMiimallModelMP800Quantity1 setMaterialSteel net + zinc alloy hand holding partSpecificationInterface3.5mmPowered ByPower FreeMicrophone Frequency Response20Hz~20kHzSensitivity45dB±1dBMic Polar PatternsCardioidImpedanceUP 1000ohmPacking List1 x Microphone 1 x Shock mount 1 x Power cord 1 x Anti-wind foam cap 1 x Microphone pop filter wind screen 1 x Arm stand body 1 x Clip 1 x Mounting base 1 x Screw nut 1 x XLR male to XLR female cable 1 x User manualPackage Weight:1.629kg (3.591lb)Package Size:40cm x 16.2cm x 9cm (15.75in x 6.30in x 3.54in)